QCC3005 stereo flash programmable solution with Qualcomm aptx audio.
I or 2-mic Qualcommcvcheadset noise reduction and echo cancellation technology.
Fully qualified single-chip dual mode Bluetooth v5.0 System.
Radio includes integrated balun with RF performance of 9 dbm(typ)transmit power and-90dbm(typ)basic rate receiver sensitivity.
80 MHZ RISC CPU and 80 MHZ Qualcomm Kalimba DSP.
On-chip ROM, RAM, and external QSPI flash memory.
Link Layer and Dual Mode Topologies.
High Voltage Boost Module
Module Properties: Non-isolated step-up module
Input Voltage: 8~32V input(the default is 10~32V input.)
Input Current: 5A (Max)
Quiescent current: 15mA (12V liter 50V, the output voltage, the higher the current will increase too quiet)
Output Voltage: +45~390V continuously adjustable (default output ±50V)
Output Current: 0.2A Max(with input, output pressure related,the higher the output voltage, output current is smaller)
Output Power: 40W (Peak 70W)
Working Temperature: -40 ~ + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 75 KHz
Conversion efficiency: up to 88% (efficiency and input and output voltage, current, pressure-related)
Short circuit protection: Yes.
Over current protection: Yes. (Input current exceeds 4.5A, reducing the output voltage)
Over voltage protection: Yes. (Output voltage exceeds 410V, lowering the output voltage)
Input reverse polarity protection: Yes (non-self-healing, reverse burning fuse, try not reversed.)
Installation: Four 3 mm screws
Wiring: free welding output terminals
Size(L*W*H):60 x 50 x 20 mm
1 x Booster Module